View LF80CPT_409314.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
LF00AB/C SERIES
VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT
s s
s s
s
s s s
s
VERY LOW DROPOUT VOLTAGE (0.45V) VERY LOW QUIESCENT CURRENT (TYP. 50 A IN OFF MODE, 500A IN ON MODE) OUTPUT CURRENT UP TO 500 mA LOGIC-CONTROLLED ELECTRONIC SHUTDOWN OUTPUT VOLTAGES OF 1.25; 1.5; 1.8; 2.5; 2.7; 3; 3.3; 3.5; 4; 4.5; 4.7; 5; 5.2; 5.5; 6; 8; 8.5; 9; 12V INTERNAL CURRENT AND THERMAL LIMIT ONLY 2.2F FOR STABILITY AVAILABLEIN 1% (AB) OR 2% (C) SELECTION AT 25 oC SUPPLY VOLTAGE REJECTION: 80 db (TYP.) TEMPERATURE RANGE: -40 TO 125 oC
PENTAWATT
TO-220
ISOWATT220
s
DESCRIPTION The LF00 series are very Low Drop regulators available in PENTAWATT, TO-220, ISOWATT220, DPAK and PPAK package and in a wide range of output voltages. The very Low Drop voltage (0.45V) and the very low quiescent current make them particularly suitable for Low Noise, Low Power applications and specially in battery powered systems. SCHEMATIC DIAGRAM
PPAK
DPAK
In the 5 pins configuration (PENTAWATT and PPAK) a Shutdown Logic Control function is available (pin 2, TTL compatible). This means that when the device is used as a local regulator, it is possible to put a part of the board in standby, decreasing the total power consumption. In the three terminal configuration the device has the same electrical performance, but is fixed in
July 1999
1/32
LF00AB/C
ABSOLUTE MAXIMUM RATINGS
Symbol Vi Io P tot T st g T op DC Input Voltage Output Current Power Dissipation Storage Temperature Range Operating Junction Temperature Range Parameter Value -0.5 to 40 (*) Internally limited Internally limited - 40 to 150 - 40 to 125
o o
Unit V
C C
(*) For 18 < VIN < 40 the regulator is in shut-down
THERMAL DATA
Symbol Parameter PENTAWATT 3 50 TO-220 3 50 ISOWATT 220 DPAK/PPAK 4 60 8 100 Unit
o o
R thj- ca se Thermal Resistance Junction-case R thj- amb Thermal Resistance Junction-ambient
C/W C/W
CONNECTION DIAGRAM (top view)
PENTAWATT
TO-220
ISOWATT220
PPAK
DPAK
2/32
LF00AB/C
ORDERING NUMBERS
Type LF12C (*) LF12AB (*) LF15C (*) LF15AB (*) LF18C LF18AB LF25C LF25AB LF27C LF27AB LF30C LF30AB LF33C LF33AB LF35C LF35AB LF40C LF40AB LF45C (*) LF45AB (*) LF47C LF47AB LF50C LF50AB LF52C LF52AB LF55C LF55AB LF60C LF60AB LF80C LF80AB LF85C LF85AB LF90C LF90AB LF120C LF120AB PENTAWATT LF12CV5V LF12ABV5V LF15CV5V LF15ABV5V LF18C5V LF18AB5V LF25CV5V LF25ABV5V LF27CV5V LF27ABV5V LF30CV5V LF30ABV5V LF33CV5V LF33ABV5V LF35CV5V LF35ABV5V LF40CV5V LF40ABV5V LF45CV5V LF45ABV5V LF47CV5V LF47ABV5V LF50CV5V LF50ABV5V LF52CV5V LF52ABV5V LF55CV5V LF55ABV5V LF60CV5V LF60ABV5V LF80CV5V LF80ABV5V LF85CV5V LF85ABV5V LF90CV5V LF90ABV5V LF120CV5V LF120ABV5V TO-220 LF12CV LF12ABV LF15CV LF15ABV LF18CV LF18ABV LF25CV LF25ABV LF27CV LF27ABV LF30CV LF30ABV LF33CV LF33ABV LF35CV LF35ABV LF40CV LF40ABV LF45CV LF45ABV LF47CV LF47ABV LF50CV LF50ABV LF52CV LF52ABV LF55CV LF55ABV LF60CV LF60ABV LF80CV LF80ABV LF85CV LF85ABV LF90CV LF90ABV LF120CV LF120ABV ISOWATT 220 LF12CP LF12ABP LF15CP LF15ABP LF18CP LF18ABP LF25CP LF25ABP LF27CP LF27ABP LF30CP LF30ABP LF33CP LF33ABP LF35CP LF35ABP LF40CP LF40ABP LF45CP LF45ABP LF47CP LF47ABP LF50CP LF50ABP LF52CP LF52ABP LF55CP LF55ABP LF60CP LF60ABP LF80CP LF80ABP LF85CP LF85ABP LF90CP LF90ABP LF120CP LF120ABP DPAK LF12CDT LF12ABDT LF15CDT LF15ABDT LF18CDT LF18ABDT LF25CDT LF25ABDT LF27CDT LF27ABDT LF30CDT LF30ABDT LF33CDT LF33ABDT LF35CDT LF35ABDT LF40CDT LF40ABDT LF45CDT LF45ABDT LF47CDT LF47ABDT LF50CDT LF50ABDT LF52CDT LF52ABDT LF55CDT LF55ABDT LF60CDT LF60ABDT LF80CDT LF80ABDT LF85CDT LF85ABDT LF90CDT LF90ABDT LF120CDT LF120ABDT PPAK LF12CPT LF12ABPT LF15CPT LF15ABPT LF18CPT LF18ABPT LF25CPT LF25ABPT LF27CPT LF27ABPT LF30CPT LF30ABPT LF33CPT LF33ABPT LF35CPT LF35ABPT LF40CPT LF40ABPT LF45CPT LF45ABPT LF47CPT LF47ABPT LF50CPT LF50ABPT LF52CPT LF52ABPT LF55CPT LF55ABPT LF60CPT LF60ABPT LF80CPT LF80ABPT LF85CPT LF85ABPT LF90CPT LF90ABPT LF120CPT LF120ABPT Output Voltage 1.25 V 1.25 V 1.5 V 1.5 V 1.8V 1.8V 2.5 V 2.5 V 2.7 V 2.7 V 3V 3V 3.3 V 3.3 V 3.5 V 3.5 V 4V 4V 4.5 V 4.5 V 4.75 V 4.75 V 5V 5V 5.2 V 5.2 V 5.5 V 5.5 V 6V 6V 8V 8V 8.5V 8.5V 9V 9V 12 V 12 V
TEST CIRCUITS
3/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF12AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 2.5 to 16 V, Io = 5 mA V i = 2.8 V I o = 5 to 500 mA ON MODE Vi = 2.5 to 16 V Io = 0 mA Vi = 2.6 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 3.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA -40 < Ta < 125 C -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o o
Test Conditions Io = 50 mA, Vi = 3.3 V Io = 50 mA, Vi = 3.3 V -25Min. 1.238 1.225 2.5
Typ. 1.25
Max. 1.263 1.275 16
Unit V V V A mV mV mA mA A dB dB dB V V
1 2 2 0.5 50 82 77 65 50 1.25 0.8 2 10 10 10 10 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V A F
ELECTRICAL CHARACTERISTICS FOR LF12C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 2.5 to 16 V, Io = 5 mA Vi = 2.8 V Io = 5 to 500 mA ON MODE Vi = 2.5 to 16 V Io = 0 mA Vi = 2.6 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 3.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 3.3 V Io = 50 mA, Vi = 3.3 V -25Min. 1.225 1.2 2.5
Typ. 1.25
Max. 1.275 1.3 16
Unit V V V A mV mV mA mA A dB dB dB V V
1 2 2 0.5 50 82 77 65 50 1.25 0.8 2 10 10 10 10 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V A F
4/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF15AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 2.5 to 16 V, Io = 5 mA Vi = 2.8 V Io = 5 to 500 mA ON MODE Vi = 2.5 to 16 V Io = 0 mA Vi = 2.8 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 3.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA -40 < Ta < 125 C -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10
o
Test Conditions Io = 50 mA, Vi = 3.5 V Io = 50 mA, Vi = 3.5 V -25Min. 1.485 1.470 2.5
Typ. 1.5
Max. 1.515 1.530 16
Unit V V V A mV mV mA mA A dB dB dB V V
1 2 2 0.5 50 82 77 65 50 1 0.8 10 10 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V A F
ELECTRICAL CHARACTERISTICS FOR LF15C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 2.5 to 16 V, Io = 5 mA Vi = 2.8 V Io = 5 to 500 mA ON MODE Vi = 2.5 to 16 V Io = 0 mA Vi = 2.8 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 3.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 3.5 V Io = 50 mA, Vi = 3.5 V -25Min. 1.47 1.44 2.5
Typ. 1.5
Max. 1.53 1.56 16
Unit V V V A mV mV mA mA A dB dB dB V V
1 2 2 0.5 50 82 77 65 50 1 0.8 2 10 10 10 10 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V A F
5/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF18AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 2.8 to 16 V, Io = 5 mA Vi = 3.3 V Io = 5 to 500 mA ON MODE Vi = 2.5 to 16 V Io = 0 mA Vi = 3.1 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 3.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA -40 < Ta < 125 C -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o o
Test Conditions Io = 50 mA, Vi = 3.3 V Io = 50 mA, Vi = 3.3 V -25Min. 1.782 1.764 3
Typ. 1.8
Max. 1.818 1.836 16
Unit V V V A mV mV mA mA A dB dB dB V V
1 2 2 0.5 50 82 77 60 50 0.7 0.8 2 10 10 12 10 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V A F
ELECTRICAL CHARACTERISTICS FOR LF18C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 2.8 to 16 V, Io = 5 mA Vi = 3.3 V Io = 5 to 500 mA ON MODE Vi = 2.5 to 16 V Io = 0 mA Vi = 3.1 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 3.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 3.5 V Io = 50 mA, Vi = 3.5 V -25Min. 1.764 1.728 3
Typ. 1.8
Max. 1.836 1.872 16
Unit V V V A mV mV mA mA A dB dB dB V V
1 2 2 0.5 50 82 77 60 50 0.7 0.8 2 10 10 12 10 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V A F
6/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF25AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 3.5 to 16 V, Io = 5 mA Vi = 3.8 V Io = 5 to 500 mA ON MODE Vi = 3.5 to 16 V Io = 0 mA Vi = 3.8 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 4.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 4.5 V Io = 50 mA, Vi = 4.5 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF25C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 3.5 to 16 V, Io = 5 mA Vi = 3.8 V Io = 5 to 500 mA ON MODE Vi = 3.5 to 16 V Io = 0 mA Vi = 3.8 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 4.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 4.5 V Io = 50 mA, Vi = 4.5 V -25Min. 2.45 2.4
Typ. 2.5
Max. 2.55 2.6 16
Unit V V V A mV mV mA mA A dB dB dB V
1 2 2 0.5 50 82 77 65 50 0.2 0.4 2 10 10 0.35 0.7 0.8 12 12 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F 7/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF27AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 3.7 to 16 V, Io = 5 mA Vi = 4 V Io = 5 to 500 mA ON MODE Vi = 3.7 to 16 V Io = 0 mA Vi = 4 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 4.7 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 4.7 V Io = 50 mA, Vi = 4.7 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF27C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 3.7 to 16 V, Io = 5 mA Vi = 4 V Io = 5 to 500 mA ON MODE Vi = 3.7 to 16 V Io = 0 mA Vi = 4 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 4.7 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 4.7 V Io = 50 mA, Vi = 4.7 V -25Min. 2.646 2.592
Typ. 2.7
Max. 2.754 2.808 16
Unit V V V A mV mV mA mA A dB dB dB V
1 2 2 0.5 50 82 77 65 50 0.2 0.4 2 10 10 0.35 0.7 0.8 13 13 1 12 100
eN Vd V il V ih Ii CO 8/32
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF30AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 4 to 16 V, Vi = 4.3 V Io = 5 mA Io = 5 to 500 mA Test Conditions Io = 50 mA, Vi = 5 V Io = 50 mA, Vi = 5 V -25ON MODE Io = 0 mA Vi = 4 to 16 V Vi = 4.3 to 16 V Io = 500 mA OFF MODE Vi = 6 V Io = 5 mA Vi = 5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA
SVR
Supply Voltage Rejection
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF30C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 4 to 16 V, Vi = 4.3 V Io = 5 mA Io = 5 to 500 mA Test Conditions Io = 50 mA, Vi = 5 V Io = 50 mA, Vi = 5 V -25o
Min. 2.94 2.88
Typ. 3
Max. 3.06 3.12 16 15 15 1 12 100
Unit V V V A mV mV mA mA A dB dB dB V
ON MODE Io = 0 mA Vi = 4 to 16 V Vi = 4.3 to 16 V Io = 500 mA OFF MODE Vi = 6 V Io = 5 mA Vi = 5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2
SVR
Supply Voltage Rejection
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
0.35 0.7 0.8
V V V V A F 9/32
10 10
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF33AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 4.3 to 16 V, Io = 5 mA Vi = 4.6 V Io = 5 to 500 mA ON MODE Vi = 4.3 to 16 V Io = 0 mA Vi = 4.6 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 5.3 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 5.3 V Io = 50 mA, Vi = 5.3 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF33C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 4.3 to 16 V, Io = 5 mA Vi = 4.6 V Io = 5 to 500 mA ON MODE Vi = 4.3 to 16 V Io = 0 mA Vi = 4.6 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 5.3 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 5.3 V Io = 50 mA, Vi = 5.3 V -25Min. 3.234 3.168
Typ. 3.3
Max. 3.366 3.432 16
Unit V V V A mV mV mA mA A dB dB dB V
1 3 3 0.5 50 80 75 65 50 0.2 0.4 2 10 10 0.35 0.7 0.8 16 16 1 12 100
eN Vd V il V ih Ii CO 10/32
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF35AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 4.5 to 16 V, Io = 5 mA Vi = 4.8 V Io = 5 to 500 mA ON MODE Vi = 4.5 to 16 V Io = 0 mA Vi = 4.8 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 5.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 5.5 V Io = 50 mA, Vi = 5.5 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF35C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 4.5 to 16 V, Io = 5 mA Vi = 4.8 V Io = 5 to 500 mA ON MODE Vi = 4.5 to 16 V Io = 0 mA Vi = 4.8 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 5.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 5.5 V Io = 50 mA, Vi = 5.5 V -25Min. 3.43 3.36
Typ. 3.5
Max. 3.57 3.64 16
Unit V V V A mV mV mA mA A dB dB dB V
1 3 3 0.5 50 79 74 60 50 0.2 0.4 2 10 10 0.35 0.7 0.8 17 17 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F 11/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF40AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 5 to 16 V, Vi = 5.3 V Io = 5 mA Io = 5 to 500 mA Test Conditions Io = 50 mA, Vi = 6 V Io = 50 mA, Vi = 6 V -25ON MODE Io = 0 mA Vi = 5 to 16 V Vi = 5.3 to 16 V Io = 500 mA OFF MODE Vi = 6 V Io = 5 mA Vi = 6 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA
SVR
Supply Voltage Rejection
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF40C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 5 to 16 V, Vi = 5.3 V Io = 5 mA Io = 5 to 500 mA Test Conditions Io = 50 mA, Vi = 6 V Io = 50 mA, Vi = 6 V -25o
Min. 3.92 3.84
Typ. 4
Max. 4.08 4.16 16 20 20 1 12 100
Unit V V V A mV mV mA mA A dB dB dB V
ON MODE Io = 0 mA Vi = 5 to 16 V Vi = 5.3 to 16 V Io = 500 mA OFF MODE Vi = 6 V Io = 5 mA Vi = 6 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2
SVR
Supply Voltage Rejection
eN Vd V il V ih Ii CO 12/32
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
0.35 0.7 0.8
V V V V A F
10 10
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF45AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 5.5 to 16 V, Io = 5 mA Vi = 5.8 V Io = 5 to 500 mA ON MODE Vi = 5.5 to 16 V Io = 0 mA Vi = 5.8 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 6.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 6.5 V Io = 50 mA, Vi = 6.5 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF45C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 5.5 to 16 V, Io = 5 mA Vi = 5.8 V Io = 5 to 500 mA ON MODE Vi = 5.5 to 16 V Io = 0 mA Vi = 5.8 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 6.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 6.5 V Io = 50 mA, Vi = 6.5 V -25Min. 4.41 4.32
Typ. 4.5
Max. 4.59 4.68 16
Unit V V V A mV mV mA mA A dB dB dB V
1 4 4 0.5 50 77 72 60 50 0.2 0.4 2 10 10 0.35 0.70 0.8 22 22 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F 13/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF47AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 5.7 to 16 V, Io = 5 mA Vi = 6 V Io = 5 to 500 mA ON MODE Vi = 5.7 to 16 V Io = 0 mA Vi = 6 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 6.7 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 6.7 V Io = 50 mA, Vi = 6.7 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF47C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 5.7 to 16 V, Io = 5 mA Vi = 6 V Io = 5 to 500 mA ON MODE Vi = 5.7 to 16 V Io = 0 mA Vi = 6 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 6.7 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 6.7 V Io = 50 mA, Vi = 6.7 V -25Min. 4.606 4.512
Typ. 4.7
Max. 4.794 4.888 16
Unit V V V A mV mV mA mA A dB dB dB V
1 4 4 0.5 50 77 72 60 50 0.2 0.4 2 10 10 0.35 0.7 0.8 23 23 1 12 100
eN Vd V il V ih Ii CO 14/32
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF50AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 6 to 16 V, Io = 5 mA Vi = 6.3 V Io = 5 to 500 mA ON MODE Io = 0 mA Vi = 6 to 16 V Vi = 6.3 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 7 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 7 V Io = 50 mA, Vi = 7 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF50C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 6 to 16 V, Io = 5 mA Vi = 6.3 V Io = 5 to 500 mA ON MODE Io = 0 mA Vi = 6 to 16 V Vi = 6.3 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 7 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 7 V Io = 50 mA, Vi = 7 V -25Min. 4.9 4.8
Typ. 5
Max. 5.1 5.2 16
Unit V V V A mV mV mA mA A dB dB dB V
1 5 5 0.5 50 76 71 60 50 0.2 0.4 2 10 10 0.35 0.7 0.8 25 25 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F 15/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF52AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 6.2 to 16 V, Io = 5 mA Vi = 6.5 V Io = 5 to 500 mA ON MODE Vi = 6.2 to 16 V Io = 0 mA Vi = 6.5 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 7.2 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 7.2 V Io = 50 mA, Vi = 7.2 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF52C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 6.2 to 16 V, Io = 5 mA Vi = 6.5 V Io = 5 to 500 mA ON MODE Vi = 6.2 to 16 V Io = 0 mA Vi = 6.5 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 7.2 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 7.2 V Io = 50 mA, Vi = 7.2 V -25Min. 5.096 4.992
Typ. 5.2
Max. 5.304 5.408 16
Unit V V V A mV mV mA mA A dB dB dB V
1 5 5 0.5 50 76 71 60 50 0.2 0.4 2 10 10 0.35 0.7 0.8 26 26 1 12 100
eN Vd V il V ih Ii CO 16/32
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF55AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 6.5 to 16 V, Io = 5 mA Vi = 6.8 V Io = 5 to 500 mA ON MODE Vi = 6.5 to 16 V Io = 0 mA Vi = 6.8 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 7.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 7.5 V Io = 50 mA, Vi = 7.5 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF55C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 6.5 to 16 V, Io = 5 mA Vi = 6.8 V Io = 5 to 500 mA ON MODE Vi = 6.5 to 16 V Io = 0 mA Vi = 6.8 to 16 V Io = 500 mA OFF MODE Vi = 6 V SVR Supply Voltage Rejection Io = 5 mA Vi = 7.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 6 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 7.5 V Io = 50 mA, Vi = 7.5 V -25Min. 5.39 5.28
Typ. 5.5
Max. 5.61 5.72 16
Unit V V V A mV mV mA mA A dB dB dB V
1 5 5 0.5 50 76 71 60 50 0.2 0.4 2 10 10 0.35 0.70 0.8 27 27 1 12 100
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F 17/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF60AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 7 to 16 V, Vi = 7.3 V ON MODE Vi = 7 to 16 V Vi = 7.3 to 16 V Io = 5 mA Io = 5 to 500 mA Io = 0 mA Io = 500 mA Test Conditions Io = 50 mA, Vi = 8 V Io = 50 mA, Vi = 8 V -25OFF MODE Vi = 9 V SVR Supply Voltage Rejection Io = 5 mA Vi = 8 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 9 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF60C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 7 to 16 V, Vi = 7.3 V ON MODE Vi = 7 to 16 V Vi = 7.3 to 16 V Io = 5 mA Io = 5 to 500 mA Io = 0 mA Io = 500 mA Test Conditions Io = 50 mA, Vi = 8 V Io = 50 mA, Vi = 8 V -25o
Min. 5.88 5.76
Typ. 6
Max. 6.12 6.24 16 30 30 1.5 12 140
Unit V V V A mV mV mA mA A dB dB dB V
OFF MODE Vi = 9 V SVR Supply Voltage Rejection Io = 5 mA Vi = 8 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 9 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2
eN Vd V il V ih Ii CO 18/32
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
0.35 0.7 0.8
V V V V A F
10 10
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF80AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 9 to 16 V, Io = 5 mA Vi = 9.3 V Io = 5 to 500 mA ON MODE Io = 0 mA Vi = 9 to 16 V Vi = 9.3 to 16 V Io = 500 mA OFF MODE Vi = 9 V SVR Supply Voltage Rejection Io = 5 mA Vi = 10 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 9 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 10 V Io = 50 mA, Vi = 10 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF80C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 9 to 16 V, Io = 5 mA Vi = 9.3 V Io = 5 to 500 mA ON MODE Io = 0 mA Vi = 9 to 16 V Vi = 9.3 to 16 V Io = 500 mA OFF MODE Vi = 9 V SVR Supply Voltage Rejection Io = 5 mA Vi = 10 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 9 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 10 V Io = 50 mA, Vi = 10 V -25Min. 7.84 7.68
Typ. 8
Max. 8.16 8.32 16
Unit V V V A mV mV mA mA A dB dB dB V
1 8 8 0.7 70 72 67 57 50 0.2 0.4 2 10 10 0.35 0.7 0.8 40 40 1.5 12 140
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F 19/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF85AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 9.5 to 16 V, Io = 5 mA Vi = 9.8 V Io = 5 to 500 mA ON MODE Vi = 9.5 to 16 V Io = 0 mA Vi = 9.8 to 16 V Io = 500 mA OFF MODE Vi = 9 V SVR Supply Voltage Rejection Io = 5 mA Vi = 10.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 9 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2 2 10 10 Test Conditions Io = 50 mA, Vi = 10.5 V Io = 50 mA, Vi = 10.5 V -25eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF85C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 9.5 to 16 V, Io = 5 mA Vi = 9.8 V Io = 5 to 500 mA ON MODE Vi = 9.5 to 16 V Io = 0 mA Vi = 9.8 to 16 V Io = 500 mA OFF MODE Vi = 9 V SVR Supply Voltage Rejection Io = 5 mA Vi = 10.5 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 9 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA 2
o
Test Conditions Io = 50 mA, Vi = 10.5 V Io = 50 mA, Vi = 10.5 V -25Min. 8.33 8.16
Typ. 8.5
Max. 8.67 8.84 16
Unit V V V A mV mV mA mA A dB dB dB V
1 8 8 0.7 70 72 67 57 50 0.2 0.4 2 10 10 0.35 0.7 0.8 42 42 1.5 12 140
eN Vd V il V ih Ii CO 20/32
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF90AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 10 to 16 V, Vi = 10.3 V Io = 5 mA Io = 5 to 500 mA Test Conditions Io = 50 mA, Vi = 11 V Io = 50 mA, Vi = 11 V -25ON MODE Io = 0 mA Vi = 10 to 16 V Vi = 10.3 to 16 V Io = 500 mA OFF MODE Vi = 10 V Io = 5 mA Vi = 11 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 10 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA
SVR
Supply Voltage Rejection
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF90C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 10 to 16 V, Io = 5 mA Vi = 10.3 V Io = 5 to 500 mA ON MODE Io = 0 mA Vi = 10 to 16 V Vi = 10.3 to 16 V Io = 500 mA OFF MODE Vi = 10 V SVR Supply Voltage Rejection Io = 5 mA Vi = 11 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 10 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA
o
Test Conditions Io = 50 mA, Vi = 11 V Io = 50 mA, Vi = 11 V -25Min. 8.82 8.64
Typ. 9
Max. 9.18 9.36 16
Unit V V V A mV mV mA mA A dB dB dB V
1 9 9 0.7 70 71 66 56 50 0.2 0.4 2 10 10 0.35 0.7 0.8 45 45 1.5 12 140
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
V V V V A F 21/32
LF00AB/C
ELECTRICAL CHARACTERISTICS FOR LF120AB (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 13 to 16 V, Vi = 13.3 V Io = 5 mA Io = 5 to 500 mA Test Conditions Io = 50 mA, Vi = 15 V Io = 50 mA, Vi = 15 V -25ON MODE Vi = 13 to 16 V Io = 0 mA Vi = 13.3 to 16 V Io = 500 mA OFF MODE Vi = 13 V Io = 5 mA Vi = 14 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 oC Vi = 13 V, Vc = 6 V ESR = 0.1 to 10 Io = 0 to 500 mA
SVR
Supply Voltage Rejection
eN Vd V il V ih Ii CO
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
ELECTRICAL CHARACTERISTICS FOR LF120C (refer to the test circuits, Tj = 25 oC, Ci = 0.1 F, Co = 2.2 F unless otherwise specified)
Symbol Vo Vi I o ut V o V o Id Parameter Output Voltage Operating Input Voltage Output Current Limit Line Regulation Load Regulation Quiescent Current Vi = 13 to 16 V, Vi = 13.3 V Io = 5 mA Io = 5 to 500 mA Test Conditions Io = 50 mA, Vi = 14 V Io = 50 mA, Vi = 14 V -25o
Min. 11.76 11.52
Typ. 12
Max. 12.24 12.48 16 60 60 1.5 12 140
Unit V V V A mV mV mA mA A dB dB dB V
ON MODE Vi = 13 to 16 V Io = 0 mA Vi = 13.3 to 16 V Io = 500 mA OFF MODE Vi = 13 V Io = 5 mA Vi = 14 V 1V f = 120 Hz f = 1 KHz f = 10 KHz B = 10 Hz to 100 KHz Io = 200 mA Io = 500 mA -40 < Ta < 125 oC -40 < Ta < 125 C Vi = 13 V, Vc = 6 V 2 ESR = 0.1 to 10 Io = 0 to 500 mA 2
SVR
Supply Voltage Rejection
eN Vd V il V ih Ii CO 22/32
Output Noise Voltage Dropout Voltage Control Input Logic Low Control Input Logic High Control Input Current Output Bypass Capacitance
0.35 0.7 0.8
V V V V A F
10 10
LF00AB/C
TYPICAL PERFORMANCE CHARACTERISTICS Dropout Voltage vs Output Current Dropout Voltage vs Temperature
Supply Current vs Input Voltage
Supply Current vs Input Voltage
Short Circuit Current vs Input Voltage
Supply Current vs Temperature
23/32
LF00AB/C
Logic Controlled Precision 3.3/5.0V Selectable Output
Sequential Multi-Output Supply
24/32
LF00AB/C
Multiple Supply With ON/OFF Toggle Switch
Basic Inhibit Functions
25/32
LF00AB/C
Delayed Turn-On
Low Voltage Bulb Blinker
26/32
LF00AB/C
PENTAWATT (VERTICAL) MECHANICAL DATA
DIM. A C D D1 E F F1 G G1 H2 H3 L L1 L2 L3 L5 L6 L7 M M1 Dia mm TYP. inch TYP.
MIN.
2.4 1.2 0.35 0.8 1 3.2 6.6 10.05
3.4 6.8
MAX. 4.8 1.37 2.8 1.35 0.55 1.05 1.4 3.6 7 10.4 10.4
MIN.
0.094 0.047 0.014 0.031 0.039 0.126 0.260 0.396
0.134 0.268
MAX. 0.189 0.054 0.110 0.053 0.022 0.041 0.055 0.142 0.276 0.409 0.409
17.85 15.75 21.4 22.5 2.6 15.1 6 4.5 4 3.65 3.85 0.144 3 15.8 6.6 0.102 0.594 0.236
0.703 0.620 0.843 0.886 0.118 0.622 0.260 0.177 0.157 0.152
P010E
27/32
LF00AB/C
TO-220 MECHANICAL DATA
DIM. MIN. A C D D1 E F F2 G H2 H3 L2 L3 L5 L6 L7 Dia. 26.3 2.6 15.1 6 3.65 10.05 16.2 26.7 27.1 3 15.8 6.6 3.85 1.035 0.102 0.594 0.236 0.144 2.4 1.2 0.35 0.61 1.15 4.95 5.08 mm TYP. MAX. 4.8 1.37 2.8 1.35 0.55 0.94 1.4 5.21 10.4 10.4 0.396 0.638 1.051 1.067 0.118 0.622 0.260 0.152 0.094 0.047 0.014 0.024 0.045 0.195 0.200 MIN. inch TYP. MAX. 0.189 0.054 0.110 0.053 0.022 0.037 0.055 0.205 0.409 0.409
P011D
28/32
LF00AB/C
ISOWATT220 MECHANICAL DATA
DIM. MIN. A B D E F F1 F2 G G1 H L2 L3 L4 L6 L7 O 28.6 9.8 15.9 9 3 4.4 2.5 2.5 0.4 0.75 1.15 1.15 4.95 2.4 10 16 30.6 10.6 16.4 9.3 3.2 1.126 0.385 0.626 0.354 0.118 mm TYP. MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.015 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
A
B
L3 L6 L7 F1 F
D
G1
E
H
F2
123 L2 L4
P011G
G
29/32
LF00AB/C
TO-252 (DPAK) MECHANICAL DATA
mm MIN. A A1 A2 B B2 C C2 D E G H L2 L4 0.6 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 6.4 4.4 9.35 0.8 1 0.023 TYP. MAX. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 6.6 4.6 10.1 MIN. 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 0.252 0.173 0.368 0.031 0.039 inch TYP. MAX. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.260 0.181 0.397
DIM.
H
A
C2
C
DETAIL "A"
A1
L2
D DETAIL "A" B
=
=
3
B2
=
=
G
E
2
L4
1
=
=
A2
0068772-B
30/32
LF00AB/C
PPAK MECHANICAL DATA
mm MIN. A A1 A2 B B2 C C2 D E G G1 H L2 L4 0.6 2.2 0.9 0.03 0.4 5.2 0.45 0.48 6 6.4 4.9 2.38 9.35 0.8 TYP. MAX. 2.4 1.1 0.23 0.6 5.4 0.6 0.6 6.2 6.6 5.25 2.7 10.1 1 1 0.023 MIN. 0.086 0.035 0.001 0.015 0.204 0.017 0.019 0.236 0.252 0.193 0.093 0.368 0.031 inch TYP. MAX. 0.094 0.043 0.009 0.023 0.212 0.023 0.023 0.244 0.260 0.206 0.106 0.397 0.039 0.039
DIM.
0078180/B
31/32
LF00AB/C
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics (c) 1999 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. http://www.st.com .
32/32

▲Up To Search▲

Price & Availability of LF80CPT

	To Download LF80CPT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .